Open AccessElectrical Conductivity of a Failed Septic System Soil Absorption Field
Author(s) -
Lee Brad D.,
Jenkinson Byron J.,
Doolittle James A.,
Taylor Richard S.,
Tuttle J. Wes
Publication year - 2006
Publication title -
vadose zone journal
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.036
H-Index - 81
ISSN - 1539-1663
DOI - 10.2136/vzj2005.0116
Subject(s) - transect , water content , soil water , septic tank , moisture , environmental science , soil science , geology , absorption (acoustics) , geotechnical engineering , materials science , environmental engineering , composite material , oceanography
Locating existing septic systems and determining the extent of soil contamination after septic system failure can be destructive, time consuming, and a nuisance to homeowners. The objective of this study was to determine the effectiveness of noninvasive electromagnetic induction (EMI) for locating a failed septic system in fine‐textured glacial‐till‐derived soils. Components of a failed septic system were located with a push probe, georeferenced with a theodolite, and surveyed with a dual receiver EMI sensor (DUALEM‐2) in December 2001 (wet soil moisture condition) and July 2002 (dry soil moisture condition). Three transects located perpendicular to the soil absorption field trenches were sampled to a depth of 1.2 m and used to ground reference the EMI survey. Near‐surface (1‐m depth) apparent conductivity (EC a ) was significantly correlated to unweighted average electrical conductivity from soil saturated paste extracts (EC sat ; r = 0.79). The EC a below the soil absorption field was higher than the surrounding native soil under both dry and wet soil moisture conditions. Individual soil absorption trenches had a higher EC a than background EC a under both soil moisture conditions. A higher EC a pattern that was apparent in December 2001 associated with discharge of wastewater at shallow depths was not evident in July 2002 after the system had been abandoned for 6 mo. While more research is warranted, results from this study suggest that electromagnetic induction is a promising technique to identify the location of septic system components, failed septic systems, and their associated effluent plumes.