Premium
Granular and Dissolved Polyacrylamide Effects on Hydraulic Conductivity of a Fine Sand and a Silt Loam
Author(s) -
Shainberg Isaac,
Goldstein D.,
Mamedov A. I.,
Levy G. J.
Publication year - 2011
Publication title -
soil science society of america journal
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.836
H-Index - 168
eISSN - 1435-0661
pISSN - 0361-5995
DOI - 10.2136/sssaj2010.0293
Subject(s) - loam , leaching (pedology) , polyacrylamide , hydraulic conductivity , chemistry , silt , lessivage , soil conditioner , soil science , soil water , environmental science , geology , paleontology , polymer chemistry
The impact of a linear, high molecular weight, moderate negative charge density polyacrylamide (PAM) on soil hydraulic conductivity (HC) and the mechanisms involved are partially understood. Our objectives were to evaluate the impact of (i) electrolyte concentration of the PAM solution, (ii) mode of PAM application, and (iii) drying of the applied PAM solution on the HC of a fine sand and a silt loam. We exposed the two media to (i) leaching with deionized water (DW) or a 0.01 mol L −1 CaCl 2 solution, both containing 25 mg L −1 PAM, and (ii) leaching with DW after addition of either 2 g m −2 of dry PAM granules (with or without gypsum) to the soil surface, or an equivalent amount of PAM in solution (with or without drying) to the soil column before leaching. For both media, leaching the columns with DW containing PAM resulted in a significantly lower steady‐state HC (HCss, <0.10 cm h −1 ) than the HCss obtained for leaching with DW only. In the silt loam, replacing the PAM in the 0.01 mol L −1 CaCl 2 solution with DW resulted in a moderate decline in the HC. Leaching the soil with DW after adding granular PAM to the surface resulted in a HCss of 0.18 cm h −1 , while after adding a concentrated PAM solution the HCss was 0.11 cm h −1 . Drying of the added PAM solution before leaching led to a twofold increase in the HCss. The adverse impact of PAM on the HC was ascribed to the extension of the unadsorbed segments of the PAM chains into the pores, thus creating a drag on the flowing water.