Premium
Soil Moisture Determination by a Portable Neutron Scattering Moisture Meter
Author(s) -
Stone J. F.,
Kirkham D.,
Read A. A.
Publication year - 1955
Publication title -
soil science society of america journal
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.836
H-Index - 168
eISSN - 1435-0661
pISSN - 0361-5995
DOI - 10.2136/sssaj1955.03615995001900040007x
Subject(s) - loam , environmental science , moisture , water content , neutron , neutron detection , neutron source , neutron probe , neutron temperature , electromagnetic shielding , soil water , materials science , soil science , geology , geotechnical engineering , nuclear physics , physics , neutron cross section , composite material
A portable, battery‐powered device for measurement of soil moisture by neutron scattering has been constructed and used for field measurements. The equipment, aside from being portable, differs from previously reported devices of this type as follows: (a) A fast neutron source in the form of an annulus is placed about the center of a slow neutron detecting tube; (b) Recently developed glow transfer tubes are used for absolute neutron count determinations; ( c ) A calibrating volume of paraffin, which is also used as a neutron shield, is incorporated as a part of the source‐detector carrying case, to permit simple field checking and standardization of the device. The detector tube is partially shielded with cadmium to reduce the vertical extent of the soil “sample” contributing to the neutron count. Field data are presented. It was found, by locating the source‐detector at various depths in pipes sunk vertically into the soil, that, except for the surface 6 to 9 inches, the equipment generally gave the soil moisture per unit soil bulk volume, within the range of the standard deviation of gravimetric determinations. A single calibration curve serves for all soils tested (sand, silt loam, silty clay loam). The equipment, complete with batteries, lead and paraffin shielding, weighs 45 pounds. The shielding protects the operator against radiation hazard and is sufficient for at least 8 hours per day use, 6 days a week.