Pyroelectrometallurgical processing of bismuth-containing oxides

In this work, we substantiate and develop a general pyroelectrometallurgical technology for processing bismuth dross and oxides (the intermediate products of lead bullion refining by the Betterton-Kroll process) to obtain crude bismuth. The research focuses on bismuth dross (3–5% Bi; 80–85% Pb) remelted at 500–600°С in the presence of NaNO3 and NaOH, as well as the obtained alkaline melt (bismuth oxides, 1–5% Bi; 60–70% Pb). The conducted experiments allowed us to determine optimal parameters of the main steps of processing bismuth oxide, as well as the characteristics of obtained products. Reduction smelting of bismuth oxides at 1150°C (with the addition of sodium carbonate, quartz and fine coke in the amount of 66, 25 and 5% of bismuth oxides mass, respectively) is proposed, leading to bismuth lead formation. Its decoppering is carried out at 350–600°C with 2.0% sulfur (by its weight), added to the melt. We propose to carry out the alkaline treatment of the decoppered Pb-Bi alloy at 500oC in contact with sodium hydroxide, sodium nitrate and sodium chloride, taken in amounts up to 10.2, 8.3 and 1.4% by weight of bismuth lead, respectively. Subsequent electrolysis comprises electrolytic processing of purified Pb-Bi alloy ingots at 550oC. The electrolyte consists of a melt with the following composition, %: NaCl – 7, KCl – 35, PbCl 2 – 18 and ZnCl 2 – 40. As a result, two end products were obtained by the proposed bismuth oxide processing. The anodic product at the second stage of electrolysis, crude bismuth (yielded 1.1% by the weight of oxides) contains 93.62% Bi and 4.14% Pb, extraction from oxides amounts to 19.0% Bi and 0.1% Pb. About 1.2% Bi and 9.1% Pb of their initial content in the oxides are transferred to the cathodic product containing 0.033% Bi and 97.83% Pb (the yield equalled 5.1% of the oxides).