Open AccessVoltage characteristic as a parameter for surge arrester diagnosing
Author(s) -
En Dar Kim,
I.E. Korostelev
Publication year - 2021
Publication title -
vestnik nacionalʹnogo tehničeskogo universiteta "hpi". problemy soveršenstvovaniâ èlektričeskih mašin i apparatov
Language(s) - English
Resource type - Journals
eISSN - 2411-0604
pISSN - 2079-3944
DOI - 10.20998/2079-3944.2021.2.08
Subject(s) - surge arrester , lightning arrester , electrical engineering , overvoltage , surge , voltage , capacitor , engineering
An alternative method for field MOV surge arresters diagnosing was observed, the controlled characteristic was the surge voltage of a gap arrester. The condenser that was connected in series with gap arrester was applied as voltage measurement sensor. Electrical aging of active elements (MOV), surge arrester insulation degradation and other types of electric faults causes to voltage increase at capacitor. The voltage value can be measured directly or the energy stored in capacitor can be transformed to electromagnetic signal and, then, registered remotely by specific radio transceiver. The capacitor connected in series with the surge arrester can also be used for leakage current limitation during all the life period of surge arrester. Shunted with a spark gap and presented as the low-current gap arrester with pre-sated discharge voltage glass (porcelain) pin-cap insulator can be the simplest, but reliable sensor. Taking into consideration modern technologies the surge arrester statement continuous monitoring system can be designed. It also allows locating the place of damaged arrester that is particularly true for remote maintenance of equipped with surge protection devices electrical