INTERACTION OF THE ABRASIVE MEDIUM WITH THE TREATED SURFACE AND THE PROCESS OF METAL REMOVAL DURING VIBRATION TREATMENT IN THE PRESENCE OF A CHEMICALLY ACTIVE SOLUTION

Interaction of working medium granules with the processed surface of the part is considered. It is noted that the processing methods are characterized by the dynamic interaction of the abrasive medium with the processed surface. It is indicated that during vibration treatment there is an impact contact of the abrasive granule with the surface of the part, which leads to the formation of characteristic traces during the formation of the surface relief. The types of impact of abrasive grains of working medium granules on the surface of the processed part are identified. It is indicated that the effect of abrasive grains depends on the geometric parameters of the tops of the grains and the working contour of the granule as a whole. The alternation of the operation of abrasive grains in the connection with the nature of the motion of the granule over the surface of the part is shown. The interaction of surfaces of bodies during vibration treatment is considered. The distinctive features of the vibration treatment method from other analogs are indicated. The conditions for the formation of the surface layer of the part during vibration processing are given. The analysis of the mechanical-physicochemical model of the micro-cutting process in the presence of a chemically active solution is carried out and a comparison of the intensity of technologies for vibration treatment of steel parts is given.