Open AccessFORMATION OF FUNCTIONAL PLASMA SPRAYED COATINGS WITH COMPLEX OF IMPROVED PHYSICAL, MECHANICAL AND OPERATIONAL PROPERTIES
Author(s) -
Anton Karpechenko,
Maksym M. Bobrov
Publication year - 2021
Publication title -
energetika. ekonomìka, tehnologìï, ekologìâ
Language(s) - English
Resource type - Journals
eISSN - 2308-7382
pISSN - 1813-5420
DOI - 10.20535/1813-5420.1.2021.242179
Subject(s) - materials science , indentation hardness , hardening (computing) , coating , composite material , rock blasting , bond strength , metallurgy , layer (electronics) , microstructure , adhesive , geotechnical engineering , engineering
The possibility of increasing the complex of physical, mechanical and operational properties of plasma sprayed coatings from powders of the PG-19M-01 and PRH18N9 grades due to the electric pulse effect on the heterophase high-temperature flow during spraying and next surface plastic deformation of the deposited coatings by shot blasting has been investigated. It is shown that shot blasting provides the formation of a hardening layer with a thickness of up to 180...200 μm, while the maximum level of microhardness is observed at a depth of about 60 μm. The microhardness of the coating from PG-19M-01 powder at the point of maximum hardening increases by 35%; steel coatings from PR-H18N9 powder – by 48% compared to the state after spraying. Experimental studies of the effect of this treatment on the bond strength and wear resistance of the obtained coatings have been carried out. It is shown that after shot-blasting the bond strength of the coatings decreases by 10...15%, and the wear resistance increases by 32...38%.