Open AccessNUMERICAL METHODS FOR THE SIMULATION OF SEGMENTED CHIPS AND EXPERIMENTAL VALIDATION IN MACHINING OF TI-6AL-4V
Author(s) -
Christian Menze,
Robert Wegert,
Tim Reeber,
F. Erhardt,
HansChristian Möhring,
Jan Stegmann
Publication year - 2021
Publication title -
mm science journal
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.195
H-Index - 10
eISSN - 1805-0476
pISSN - 1803-1269
DOI - 10.17973/mmsj.2021_11_2021152
Subject(s) - machining , finite element method , process (computing) , chip formation , computer science , mechanical engineering , tool wear , residual stress , materials science , structural engineering , engineering , metallurgy , operating system
The simulation of machining processes holds the opportunity for process improvement on many levels. Possible benefits that can be derived from accurate representations of the real processes on the tool from simulations include a prediction of tool wear, the shape of the chips produced, the forces, frictions and temperatures that arise and the residual stresses in the workpiece. These predictions can be used to improve the process in terms of its economic and ecological behaviour: Increasing the service life of the tools used through an improved understanding of the tool-workpiece interaction. The finite element method (FEM), among others, has emerged as a common method for simulating these processes. When simulating machining processes using FEM, a major challenge is to avoid or compensate for the mesh distortions caused by the massive, fast-moving deformation processes, but at the same time to allow the mesh to be discretised in some way to ensure chip removal. To this end, various approaches will be presented in the course of this work and the mesh-based approaches will be explored in depth. Among other things, a remeshing approach for these investigations was developed. The machining of TI6AL4V is used to illustrate these approaches, as its tendency to form segmented chips is particularly challenging to model.