Open AccessSeparation of carvone by batch distillation from the mixture obtained from limonene oxidation
Author(s) -
Jaime-Andrés Becerra,
Aída Luz Villa
Publication year - 2021
Publication title -
revista facultad de ingeniería universidad de antioquia
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.16
H-Index - 12
eISSN - 2422-2844
pISSN - 0120-6230
DOI - 10.17533/udea.redin.20210848
Subject(s) - carvone , chemistry , limonene , distillation , reboiler , continuous distillation , vacuum distillation , data scrubbing , batch distillation , chromatography , organic chemistry , fractional distillation , waste management , essential oil , engineering
Limonene is the main constituent of citrus oils whose oxidation produces a set of fine chemical compounds such as carvone, carveol, and limonene 1,2-epoxide. This contribution reports the results of the experimental evaluation and computational simulation of carvone separation by fractional distillation from the reaction mixture. Carvone was obtained from limonene oxidation over a perchlorinated iron phthalocyanine supported on modified silica catalyst (FePcCl16-NH2-SiO2) and t-butyl hydroperoxide (TBHP) as oxidant. Both experimental and simulation results support that fractional distillation (in batch and continuous) is a suitable technique for concentrating carvone. However, in the presence of water, the formation of immiscible L-L phases makes the experimental separation of carvone more difficult. Simulation results of the batch distillation incorporating the NRTL-RK thermodynamic model indicate that if water, acetone, and t-butanol are previously removed from the reaction mixture, carvone composition can be enriched in the reboiler from 4% up to 50%, or around 86.5% if the removal is in a third distillate cut under vacuum conditions.