Open AccessCOMPARATIVE ANALYSIS OF TECHNOLOGIES OF MICROPILES ARRANGEMENT DURING STRENGTHENING OF WEAK SOIL BASES
Author(s) -
В. Д. Петренко,
V. S. Andrieiev,
V. V. Kharchenko
Publication year - 2021
Publication title -
mosti ta tunelì: teorìâ, doslìdžennâ, praktika
Language(s) - English
Resource type - Journals
eISSN - 2413-6212
pISSN - 2227-1252
DOI - 10.15802/bttrp2021/233978
Subject(s) - drill , geotechnical engineering , finite element method , elastic modulus , structural engineering , geology , engineering , materials science , mechanical engineering , composite material
Purpose. Perform a comparative analysis of drill and injection (jet-grouting) and drill and mixing technologies of micropiles arrangement of weak soil bases with the identification of technological features that significantly effect on the design and calculation of weak soil bases strengthening. Methodology. To solve this problem, was conducted of the detailed analysis of the most effective methods of micropiles arrangement during the strengthening of weak soil bases (physical immersion, bored and packing of concrete, drill and injection of ground, drill and mixing soils and application of special effects). Peculiarities of technological parameters of jet-grouting and drill and mixing technologies are considered in detail. The advantages and disadvantages of each of the technologies are revealed. It is proved that the drill and mixing technology has a greater degree of prediction of the stress-strain state change of the inhomogeneous base. To determine the influence of deformation characteristics, a spatial finite-element model based on a flat prototype was created, which was built using automatic triangulation of the professional calculation complex SCAD. Findings. A significant reduction of the deformed state at an almost constant stress state is obtained. When the deformation characteristic increases by 3 times (the ratio of the modulus of elasticity of the soil cement pile and the weak soil), the vertical displacements of the foundation decrease by 1.23 times. Originality. It consists in obtaining the dependence of the change of vertical displacements and stresses on the modulus of elasticity of the soil cement micropile, created on the basis of drill and mixing technology. Practical value. It consists in the obtained results of comparative analysis of substantiation of micropile installation drill and mixing technology during strengthening of weak soil bases with definition of technological features and choice of drill and mixing as the most effective variant from the point of view of technology realization.