Open AccessStudy on reduction of hand-transmitted vibration in self propelled vertical conveyor reaper by isolators
Author(s) -
T.R. Gururaj,
A. K. Mehta
Publication year - 2020
Publication title -
international journal of agricultural engineering
Language(s) - English
Resource type - Journals
eISSN - 0976-7223
pISSN - 0974-2662
DOI - 10.15740/has/ijae/13.2/212-219
Subject(s) - vibration , chassis , combine harvester , tractor , acceleration , automotive engineering , cylinder , transmissibility (structural dynamics) , environmental science , vibration isolation , acoustics , engineering , physics , structural engineering , mechanical engineering , classical mechanics
The self propelled vertical conveyor reaper is commonly used for harvesting wheat, rice etc. It has become a main or the sole of mechanical power source on small and medium size farms in India. The operators of VCR are exposed to a high level of vibration arising from single cylinder engine during field operations. The vibration from the VCR is transmitted from handle to hands, arms and shoulders. In the present study, experiments were conducted to reduce the vibration extent in VCR for two operational conditions i.e. transportation on bitumen road and wheat harvesting operation by using isolators in between engine and chassis. The vibrations were measured at engine speed 2200 and 2800 rpm. In this study it was found that the vibration magnitudes decreased with increase in engine speed from 2200 to 2800 rpm in both operational conditions. The highest vibration values were observed in x-direction. The maximum frequency-weighted vibration acceleration (rms) in x-direction was 18.76 and 22.8 ms-2 in transportation and wheat harvesting, respectively. After incorporation of isolators the vibration total values reduced at 2200 rpm form 22.8 ms-2 to 9.63 ms-2 and 28.11 ms-2 to 12.57 ms-2 in transportation and wheat harvesting, respectively (Fig. 1 and 2). Whereas at 2800 rpm the vibration total values reduced form 12.93 ms-2 to 5.85ms-2 and 17.86 ms-2 to 8.42 ms-2, respectively. The average increment in 8 hour exposure time for occurrence of white finger syndrome from 1.16 to 2.88 year and 0.93 to 2.17 year for isolators in transportation and wheat harvesting, respectively.