Open AccessInfluence of aeration rate and method of process activation on the degree of purification of zinc-containing waste water by ferritization
Author(s) -
Bogdan Yemchura,
Gennadii Kochetov,
Dmitry Samchenkо,
Oleksandr Kovalchuk
Publication year - 2021
Publication title -
eastern-european journal of enterprise technologies
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.268
H-Index - 24
eISSN - 1729-4061
pISSN - 1729-3774
DOI - 10.15587/1729-4061.2021.248166
Subject(s) - aeration , zinc , wastewater , chemistry , cadmium , extraction (chemistry) , materials science , inorganic chemistry , chromatography , environmental engineering , metallurgy , environmental science , organic chemistry
The aeration rate for the degree of purification of highly concentrated galvanic wastewater from zinc and ferrum ions was investigated using various activation methods. It is shown that the intensity of aeration has a significant effect on the quality of wastewater treatment and the characteristics of water treatment sludge. The efficiency of the use of an energy-saving method for activating the ferritization process with the use of electromagnetic pulses for the extraction of zinc ions from wastewater has been confirmed.It was determined that with an increase in the aeration rate to 3.5 dm3/min per 1 dm3 of the reaction mixture and the use of thermal activation of the process, the residual concentration of zinc ions remains within the range of 0.12÷0.2 mg/dm3. In this case, the concentration of ferrum ions decreases to values of 0.08÷0.14 mg/dm3. It was found that at an aeration rate of 2.5 dm3/min and the use of pulsed electromagnetic (EMP) activation, the residual concentrations of heavy metal ions decrease to values of 0.08÷0.16 mg/dm3. Comparison of the results indicates the advisability of using low rates of aeration of the reaction mixture. This, together with the use of resource-saving EMR process activation, allows to achieve a significant reduction in energy costs.The quantitative phase composition of ferritization precipitates was determined, in which the crystalline phases of zinc ferrite Zn2Fe2O4 and magnetite Fe3O4, as well as ferrum oxyhydroxide FeO (OH) and sodium sulfate Na2SO4, prevail. It is found that with an increase in the volumetric aeration rate, the proportion of the ferrite phase increases. At an aeration rate of 2.0 dm3/min, more than 85 % of the zinc ferrite phase was found in the sediments. Taking into account the qualitative and quantitative composition of precipitates, it is recommended to use them in the production of building materials.The experimental results obtained make it possible to provide a comprehensive processing of liquid galvanic waste.