Open AccessThe effect of metal wool on the charging and discharging rate of the phase transition thermal storage material
Author(s) -
Olga Khliyeva,
Vitaly Zhelezny,
Aleksey Paskal,
Yana Hlek,
Dmytro Ivchenko
Publication year - 2021
Publication title -
eastern-european journal of enterprise technologies
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.268
H-Index - 24
eISSN - 1729-4061
pISSN - 1729-3774
DOI - 10.15587/1729-4061.2021.239065
Subject(s) - materials science , paraffin wax , thermal energy storage , wool , copper , composite material , thermal , phase change material , glass wool , aluminium , wax , analytical chemistry (journal) , metallurgy , thermodynamics , chemistry , chromatography , physics , layer (electronics)
Thermal energy storage (TES) plays an important role in solar heat power systems. The use of phase change materials (PCM) and selecting additives to increase the rate of heat accumulation is a promising way to increase the efficiency and reliability of such systems.The objects of the study were pure paraffin wax (PW) and composite PCMs based on it (containing aluminum and copper wool of 30 and 45 μm in diameter, respectively).An experimental setup with a cylindrical measuring cell was created, which was also considered as a model of a capsule with a thermal storage material. The rate of temperature change in the pure PW sample and samples of composite PCMs was experimentally measured. Two modes of heating and cooling were investigated: from 48 to 59 °C (mode with a phase change) and from 30 to 40 °C (mode without phase changes).Heating time from 48 to 59 °C for the PW sample was 13 min., for the PW samples with the content of aluminum wool of 0.00588 and 0.01780 m3·m-3 − 11 and 10.5 min., for the PW samples with the content of copper wool of 0.00524 and 0.01380 m3·m-3 − 11 and 8 min., correspondingly. The minimum heating time from 30 to 40 °C was 6 min. for the sample of PW with 0.01380 m3·m-3 of copper wool in comparison with 9 min. for the sample of pure PW.The expediency of using copper wool as an additive to thermal storage materials of PW to increase the charging and discharging rate of TES devices without significantly raising their price was confirmed. The presence of metal wool in molten PW suppresses bottom-up convective currents, so the main mechanism of heat transfer is thermal conductivity. This fact will contribute to a faster equalization of the temperature field by the height of heat storage capsules