Open AccessEnhancement of energy transfer efficiency for photovoltaic (PV) systems by cooling the panel surfaces
Author(s) -
Hasan Shakir Majdi,
Mahmoud A. Mashkour,
Laith Jaafer Habeeb,
Ahmad H. Sabry
Publication year - 2021
Publication title -
eastern-european journal of enterprise technologies
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.268
H-Index - 24
eISSN - 1729-4061
pISSN - 1729-3774
DOI - 10.15587/1729-4061.2021.238700
Subject(s) - photovoltaic system , automotive engineering , photovoltaic thermal hybrid solar collector , solar cable , solar energy , power (physics) , electrical engineering , maximum power principle , environmental science , engineering , computer science , solar mirror , physics , quantum mechanics
The thermal coefficient of a solar photovoltaic (PV) panel is a value that is provided with its specification sheet and tells us precisely the drop in panel performance with rising temperature. In desert climates, the PV panel temperatures are known to reach above 70 degrees centigrade. Exploring effective methods of increasing energy transfer efficiency is the issue that attracts researchers nowadays, which also contributes to reducing the cost of using solar photovoltaic (PV) systems with storage batteries. Temperature handling of solar PV modules is one of the techniques that improve the performance of such systems by cooling the bottom surface of the PV panels. This study initially reviews the effective methods of cooling the solar modules to select a proper, cost-effective, and easy to implement one. An active fan-based cooling method is considered in this research to make ventilation underneath the solar module. A portion of the output power at a prespecified high level of battery state-of-charge (SOC) is used to feed the fans. The developed comparator circuit is used to control the power ON/OFF of the fans. A Matlab-based simulation is employed to demonstrate the power rate improvements and that consumed by the fans. The results of simulations show that the presented approach can achieve significant improvements in the efficiency of PV systems that have storage batteries. The proposed method is demonstrated and evaluated for a 1.62 kW PV system. It is found from a simultaneous practical experiment on two identical PV panels of 180 W over a full day that the energy with the cooling system was 823.4 Wh, while that without cooling was 676 Wh. The adopted approach can play a role in enhancing energy sustainability.