Open AccessBackwashing performance of self-cleaning screen filters in drip irrigation systems
Author(s) -
Quanli Zong,
Zhenji Liu,
Huanfang Liu,
Haiyan Yang
Publication year - 2019
Publication title -
plos one
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.99
H-Index - 332
ISSN - 1932-6203
DOI - 10.1371/journal.pone.0226354
Subject(s) - backwashing , filtration (mathematics) , tap water , filter (signal processing) , environmental science , environmental engineering , chemistry , materials science , mathematics , geology , engineering , statistics , geomorphology , electrical engineering , inlet
The self-cleaning screen filter is one of the most common types used in drip irrigation systems. Backwashing pressure difference and backwashing time for two screen filters with one geometry and two different screens (178 μm and 124 μm) using two water qualities (tap water and sand–water mixture) were studied in a total of 88 runs (42 runs for tap water, 22 and 24 filtration cycles for sand–water mixture and backwashing, respectively). The backwashing pressure difference and backwashing time were calculated using the experimental data, and the results were largely in the range of measured values. Three constraint conditions (flowrate, sand condition and filtration time) of backwashing pressure difference were analysed, and the optimal values of backwashing pressure difference were given as 60.0 and 70.0 kPa for 178 μm and 124 μm filters, respectively. The backwashing time of the screen filter should be an optimal value that ensures that the pressure difference between the internal and external surfaces of the screen decreased to the initial value, and the sand concentration of the backwashed outlet decreased to a small, stable value. Based on the results of the backwashing experiment and prototype observation, the optimal backwashing time was given as 30 to 45 s for both screen filters.