Open AccessImpact of high UV fluences on the mechanical and sensing properties of polymer optical fibers for high strain measurements
Author(s) -
Julien Bonefacino,
Xin Cheng,
Chi Fung Jeff Pun,
Steven T. Boles,
Hwa Yaw Tam
Publication year - 2020
Publication title -
optics express
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.394
H-Index - 271
ISSN - 1094-4087
DOI - 10.1364/oe.378634
Subject(s) - materials science , fluence , laser , fiber bragg grating , optics , ultimate tensile strength , optical fiber , fiber laser , composite material , laser linewidth , optoelectronics , wavelength , fiber , physics
PMMA-based fibers are widely studied for strain measurements and show repeatable results for Fiber Bragg Gratings (FBGs) inscribed using 325 nm laser and 248 nm laser. However, there is no available material mechanical behavior characterization of the UV source impact on the fiber properties. In this manuscript, fibers are irradiated with high fluence of 325 nm and 248 nm lasers and the fibers properties are investigated using dynamic mechanical analysis and tensile strain for potential use of these fibers past the yield point. It is demonstrated that the UV sources shifted the ultimate tensile strength and changed the strain hardening behavior. Tensile strain measurements show excellent repeatability for gratings inscribed with these two sources with similar sensitivity of 1.305 nm/mɛ for FBG inscribe with 325 nm laser, and 1.345 nm/mɛ for grating written with 248 nm laser in the range 0 to 1.5 % elongation. Furthermore, tests far beyond the yield point (up to 2.8 % elongation) show that grating inscribed with lower UV wavelength exhibit hysteresis. Finally, we demonstrate that 248 nm laser fluence shall be chosen carefully whereas even high 325 nm laser fluence do not critically impact the sensor properties.