Open AccessSpectroscopic gas detection using a Bragg grating - stabilized external cavity laser, custom written in planar integrated silica-on-silicon
Author(s) -
Nicholas Davis,
S. F. Lynch,
James C. Gates,
Jane Hodgkinson,
Peter G. R. Smith,
Ralph P. Tatam
Publication year - 2019
Publication title -
optics express
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.394
H-Index - 271
ISSN - 1094-4087
DOI - 10.1364/oe.27.029034
Subject(s) - materials science , laser , optics , tunable laser , fiber bragg grating , optoelectronics , grating , distributed feedback laser , silicon , planar , wavelength , physics , computer graphics (images) , computer science
We present the development of an external cavity Bragg grating stabilized laser for tunable diode laser spectroscopy (TDLS). Our design uses a planar integrated silica-on-silicon platform incorporating a custom written Bragg grating as the wavelength-selective element of the laser cavity. We have developed a prototype singlemode laser at 1651 nm and performed a detailed characterization of its performance for the purpose of spectroscopic measurement of methane at this wavelength using a 25 cm path-length single-pass cell. Mode hop-free tuning of 0.13 nm has been demonstrated at frequencies of up to 10 kHz. A single-point limit of detection for TDLS of ΔI/I 0 = 8.3 × 10 -5 AU was achieved, which is consistent with the performance of standard distributed feedback lasers. The new device exhibits a side-mode suppression ratio of -40 dB and a low RIN of <-150 dB/Hz, and thus avoids the high levels of noise or instability normally associated with larger, mechanically driven external cavity lasers. The silica-on-silicon platform has the potential for low-volume manufacturing of special lasers at the custom wavelengths required for gas detection, without the need for investment in foundry solutions.