Open AccessFiber-tip gas pressure sensor based on dual capillaries
Author(s) -
Bingjie Xu,
Chao Wang,
D N Wang,
Yaming Liu,
Li Yi
Publication year - 2015
Publication title -
optics express
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.394
H-Index - 271
ISSN - 1094-4087
DOI - 10.1364/oe.23.023484
Subject(s) - fusion splicing , materials science , capillary action , fabrication , optics , pressure sensor , refractive index , pressure measurement , interferometry , optical fiber , single mode optical fiber , metrology , optoelectronics , fiber , composite material , medicine , alternative medicine , physics , pathology , thermodynamics , mechanical engineering , engineering
A micro-cavity fiber Fabry-Perot interferometer based on dual capillaries is proposed and demonstrated for gas pressure measurement. Such a device is fabricated by fusion splicing of a tiny segment of a main-capillary with a feeding-capillary on one end, and a single mode fiber on the other, to allow gas enters the main-capillary via the feeding-capillary. The reflection spectrum of the interferometer device shifts with the variation of gas pressure due to the dependence of gas refractive index on the pressure applied. During the device fabrication process, a core-offset fusion splicing method is adopted, which turns out to be highly effective for reducing the detection limit of the sensor. The experimental results obtained show that the proposed device exhibits a high gas pressure sensitivity of 4147 pm/MPa, a low temperature cross-sensitivity of less than 0.3 KPa/°C at atmospheric pressure, and an excellently low detection limit down to ~4.81 KPa. The robust tip structure, ultra-compact device size and ease of fabrication make the device an attractive candidate for reliable and highly sensitive gas pressure measurement in a precise location.