Open AccessSingle-layer resonant-waveguide grating for polarization and wavelength selection in Yb:YAG thin-disk lasers
Author(s) -
Moritz Vogel,
Martin Rumpel,
Birgit Weichelt,
Andreas Voß,
Matthias Haefner,
Christof Pruß,
Wolfgang Osten,
Marwan Abdou Ahmed,
Thomas Graf
Publication year - 2012
Publication title -
optics express
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.394
H-Index - 271
ISSN - 1094-4087
DOI - 10.1364/oe.20.004024
Subject(s) - optics , materials science , grating , laser , optoelectronics , resonator , full width at half maximum , physics
A single-layer resonant-waveguide grating consisting of a sub-wavelength grating coupler etched into a waveguide is proposed in order to achieve high polarization and high spectral selectivity inside an Yb:YAG thin-disk laser resonator. The designed structure was fabricated with the help of a Lloyd's-mirror interference lithography setup followed by reactive ion beam etching down to the desired grating groove depth. The wavelength and polarization dependent reflectivity is measured and compared to the design results. The behaviour of the device at higher temperatures is also investigated in the present work. The device is introduced as the end mirror of an Yb:YAG thin-disk laser cavity. Output powers of up to 123 W with a spectral bandwidth of about 0.5 nm (FWHM) is demonstrated in a multimode configuration (M2~6). In fundamental-mode operation (TEM00 with M2~1.1) 70 W of power with a spectral bandwidth of about 20 pm have been obtained. Moreover, the degree of linear polarization was measured to be higher than 99% for both multimode and fundamental mode operation.