Open AccessAll-optical recognition method of double two-dimensional optical orthogonal codes-based labels using four-wave mixing
Author(s) -
Chongfu Zhang,
Leyang Wang,
Sathishkumar Perumal,
Kun Qiu,
Heng Zhou
Publication year - 2011
Publication title -
optics express
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.394
H-Index - 271
ISSN - 1094-4087
DOI - 10.1364/oe.19.014937
Subject(s) - optical amplifier , computer science , optical performance monitoring , optics , optical cross connect , optical communication , encoder , optical fiber , bandwidth (computing) , electronic engineering , wavelength division multiplexing , physics , wavelength , telecommunications , laser , engineering , operating system
A novel all-optical label recognition method is proposed and demonstrated experimentally which is based on fiber Bragg gratings (FBGs)-based encoder/decoder and semiconductor optical amplifier (SOA). In this scheme, the optical label is firstly decoded properly, the decoded signal then generates the 1st and the 2nd order four-wave mixing (FWM) effect in different SOA, any of the frequencies achieved by the 2nd order FWM is extracted to recognize the optical label. The proposed solution can favor hardware simplicity over bandwidth efficiency in order to achieve the double two-dimensional optical orthogonal codes (2D-OOCs)-based optical label recognition in an optical packet switching (OPS) system where the bandwidth efficiency can be improved by FWM effect in SOA to achieve optical label processing and reasonable spacing of wavelengths for the payloads and optical label. The feasibility of the proposed method is validated by two experiments of the double 2D-OOCs-based optical label generation and recognition, the effect of the optical label on the payloads is also considered. These results show that the proposed method can (1) reduce effectively the code auto-correlation /cross-correlation requirements of the optical label identification and remove the cross-correlation pulses after optical decoding, (2) increase greatly the coding capacity and the number of the available optical labels, (3) improve the reliability and bandwidth efficiency of the optical label identification. The experimental results also show that the optical label has a high extinction ratio and can be operated easily.