Open AccessIn-line short cavity Fabry-Perot strain sensor for quasi distributed measurement utilizing standard OTDR
Author(s) -
Edvard Cibula,
Denis Đonlagić
Publication year - 2007
Publication title -
optics express
Language(s) - Uncategorized
Resource type - Journals
SCImago Journal Rank - 1.394
H-Index - 271
ISSN - 1094-4087
DOI - 10.1364/oe.15.008719
Subject(s) - fusion splicing , fabry–pérot interferometer , optics , materials science , fiber optic sensor , optical fiber , linearity , insertion loss , optoelectronics , electronic engineering , physics , wavelength , engineering
This paper presents an in-line, short cavity Fabry-Perot fiber optic strain sensor. A short air cavity inside a single-mode fiber is created by the fusion splicing of appropriately micro machined fiber tips. A precise tuning of the cavity length is introduced and used for the setting of the sensor static characteristics within the quasi-linear range around a quadrature point, which significantly simplifies signal processing. Sensor insertion losses achieved by short cavity design and optimized fusion splicing proved to be below 1 dB. Low insertion loss allows for effective cascading of the proposed strain sensors into a quasi-distributed sensor array. A practical 10-point quasi-distributed strain sensor array was demonstrated in practice, where each in-line sensor was tuned to the same operating point in the static characteristics, thus allowing for simple interrogation of the sensor array by using standard telecommunication OTDR. In addition, precise tuning of the short cavity Fabry Perot sensor was applied for an effective compensation of temperature-induced strain errors and for an increase in the unambiguous measuring range, while improving the overall linearity of the sensor system.