Using High-Speed Photography to Study Undercatch in Tipping-Bucket Rain Gauges*

To better understand the undercatch process associated with tipping-bucket rain gauges, a high-speed camera normally used in determining the structure of lightning was employed. The photo rate was set at 500 frames per second to observe the tipping of the bucket in a commonly used tipping-bucket rain gauge. The photos showed detail never seen before as the bucket tipped from one side to the other. Two fixed rain rates of 19.9 mm h−1 (0.78 in. h−1) and 175.2 mm h−1 (6.90 in. h−1), the minimum and maximum available, respectively, were used. The data from four tips at each rain rate were examined. The results show that the time from the beginning of a tip to the time the bucket assembly is horizontal—defined as the period during which undercatch occurs—was an average of 0.450 s for the eight cases. The average time for a complete tip was 0.524 s; thus, the vast majority of the time of a tip, 86%, is spent in undercatch mode. Because there was no apparent dependence of these times on rain rate, it should be possible to apply an accurate linear correction for undercatch as a function of rain rate given the time that undercatch occurs during a tip. Over all eight tips, the undercatch was found to be 0.98% for the 19.9 mm h−1 rate and 8.78% for the 175.2 mm h−1 rate. The procedure used to estimate the undercatch is described. Slow motion videos of the tipping of a bucket are available online.