Open AccessPrediction of High-Cycle Fatigue Performance of 1Cr11Ni2W2MoV Stainless Steel Plate after Foreign Object Damage
Author(s) -
Zhenhua Zhao,
Lingfeng Wang,
Chao Liu,
Lulu Liu,
Wei Chen
Publication year - 2020
Publication title -
international journal of aerospace engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.361
H-Index - 22
eISSN - 1687-5974
pISSN - 1687-5966
DOI - 10.1155/2020/8837564
Subject(s) - low cycle fatigue , ball (mathematics) , fatigue testing , materials science , scanning electron microscope , fatigue limit , structural engineering , mathematics , metallurgy , geometry , composite material , engineering
High-cycle fatigue (HCF) properties of 1Cr11Ni2W2MoV stainless steel impacted by a high-speed steel ball were studied by the foreign object damage (FOD) test and HCF test. The results show that the damage depth Z has the most obvious effect on the HCF limit of notched flat plate specimens, and the fatigue limit decreases with the increase of depth Z . The microcharacteristics of the FOD notch and HCF fracture of 1Cr11Ni2W2MoV stainless steel were observed by a scanning electron microscope (SEM). The results show that the microdamage features such as plastic deformation, loss of material, and microcracks promote the initiation and propagation of fatigue cracks, and the fatigue source area lies near the root of the notch. The Peterson formula and Worst Case Notch (WCN) mode were used to predict the HCF limit of flat plate specimens after FOD. The crack growth threshold was obtained by the crack growth test. The results show that the prediction results of both methods are conservative. For the notch with damage depth Z < 1 mm, the prediction accuracy of the WCN model is higher ( error range < 30 % ). For the notch with damage depth Z > 1 mm, the prediction results of both methods have large errors (>30%) with the WCN model being slightly more accurate.