Open AccessSynergistic Effect of Solid State Hydrogen and Cold Work Pretreatment on Oxide Films Grown on 316L Stainless Steel during Short Term Immersion in Deaerated High Temperature Water at 300 °C
Author(s) -
Tongming Cui,
Jiarong Ma,
Kun Zhang,
Zhanpeng Lu,
Yuanjie Tang,
Xinhe Xu,
Sergio Lozano-Pérez,
Tetsuo Shoji
Publication year - 2020
Publication title -
journal of the electrochemical society
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.258
H-Index - 271
eISSN - 1945-7111
pISSN - 0013-4651
DOI - 10.1149/1945-7111/abc728
Subject(s) - hydrogen , oxide , materials science , penetration (warfare) , metal , metallurgy , magnetite , chemical engineering , iron oxide , inorganic chemistry , chemistry , organic chemistry , operations research , engineering
The properties of the oxide films formed on solution-annealed and cold-worked 316L stainless steel (SS) specimens with and without charged hydrogen in deaerated pressurized water reactor primary water at 300 °C were investigated. The outer oxide layers of all specimens were composed of magnetite (Fe 3 O 4 ) and NiFe 2 O 4 . Charged hydrogen resulted in larger outer iron-bearing oxide particles forming due to hydrogen-enhanced outward diffusion of iron cations. Prior cold-work accelerates the oxidation was observed. Charged hydrogen led to local cracks in the oxide film and enhanced the penetration oxidation beneath the metal/oxide interface. The Cr-rich inner oxide layer grown on the prior cold-worked specimen with charged hydrogen was thicker than that on the cold-work specimen or the hydrogen-charged specimen, revealing the combined effects of charged hydrogen and prior cold-work on the acceleration of the oxidation process. The working mechanism of the solid-state hydrogen effect on the oxide film was discussed.