Premium
SU‐E‐CAMPUS‐I‐01: Nanometric Organic Photovoltaic Thin Film X‐Ray Detectors for Clinical KVp Beams
Author(s) -
Elshahat Bassem,
Filipyev Ilya,
Shrestha Suman,
Hesser Jurgen,
Gill Hardeep,
Kumar Jayant,
Karellas Andrew,
Zygmanski Piotr,
Sajo Erno
Publication year - 2014
Publication title -
medical physics
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.473
H-Index - 180
eISSN - 2473-4209
pISSN - 0094-2405
DOI - 10.1118/1.4889014
Subject(s) - materials science , active layer , indium tin oxide , electrode , x ray detector , optoelectronics , optics , layer (electronics) , acceptor , photoactive layer , detector , energy conversion efficiency , polymer solar cell , nanotechnology , thin film transistor , physics , quantum mechanics , condensed matter physics
Purpose: To fabricate and test nanometric organic photovoltaic (OPV) cells made of various active‐layer/electrode thicknesses and sizes; to determine the optimal material combinations and geometries suitable for dose measurements in clinical kilovoltage x‐ray beams. Methods: The OPV consisted of P3HT:PCBM photoactive materials sandwiched between aluminum and Indium Tin Oxide (ITO) electrodes. Direct conversion of xrays in the active layer composed of donor and acceptor semiconducting organic materials generated signal in photovoltaic mode (without external voltage bias). OPV cells were fabricated with different active layer thicknesses (150, 270, 370 nm) and electrode areas (0.4, 0.7, 0.9, 1.4, 2.6 cm 2 ). A series of experiments were preformed in the energy range of 60–150 kVp. The net current per unit area (nA/cm 2 ) was measured using 200 mAs time‐integrated beam current. Results: The net OPV current as function of beam energy (kVp) was proportional to ∼E 0, 4 5 when adjusted for beam output. The best combination of parameters for these cells was 270 nm active layer thicknesses for 0.7 cm 2 electrode area. The measured current ranged from 0.69 to 2.43 nA/cm 2 as a function of x‐ray energy between 60 and 150 kVp, corresponding to 0.09 – 0.06 nA/cm 2 /mGy, respectively, when adjusted for the beam output. Conclusion: The experiments indicate that OPV detectors possessing 270 nm active layer and 0.7 cm 2 Al electrode areas have sensitivity by a factor of 2.5 greater than commercial aSi thin film PV. Because OPV can be made flexible and they do not require highvoltage bias supply, they open the possibility for using as in‐vivo detectors in radiation safety in x‐ray imaging beams.