Open AccessExperimental and Numerical Flow Analysis of an Engine-Realistic State-of-the-Art Turbine Rear Structure
Author(s) -
Valentin Vikhorev,
Pär Nylander,
Valery Chernoray,
Jonas Larsson,
Oskar Thulin
Publication year - 2021
Language(s) - English
Resource type - Conference proceedings
DOI - 10.1115/gt2021-59224
Subject(s) - turbofan , aerodynamics , computational fluid dynamics , turbine , mechanics , flow (mathematics) , secondary flow , aerospace engineering , reynolds number , engineering , mechanical engineering , physics , turbulence
This paper presents experimental and numerical CFD studies of the aerodynamics of a turbine rear structure (TRS). The TRS test geometry is an engine-realistic state-of-the-art design with a polygonal outer case, recessed engine mount bumps, and three different vane types: regular vanes, bump vanes in bump sectors, and thick vanes. Using three different sector types simultaneously was found to be crucial for the inlet boundary conditions. Experiments were performed in a modern rotating test facility with an LPT stage upstream of the TRS. A Reynolds number of 350,000 was used, representative of a TRS in a narrow-body geared turbofan engine. The TRS performance was analyzed both at on- and off-design conditions and a thorough side-by-side comparison of CFD and experiments was performed. Static-pressure-distributions, turning and outlet flow-angles, wakes and losses, and surface-flow visualizations and outlet total pressure contours are presented. The thick vane showed good aerodynamic performance, similar to the regular vane. For the bump vane, the mount bumps were found to generate additional local separations and secondary flows, resulting in extra losses. In the regions with strong secondary flows CFD over-predicts the wakes, whereas the wakes around midspan, where secondary flows have a smaller influence, are predicted well.