z-logo
open-access-imgOpen Access
Controlling n-Heptane HCCI Combustion With Partial Reforming: Experimental Results and Modeling Analysis
Author(s) -
Vahid Hosseini,
W. Stuart Neill,
M. David Checkel
Publication year - 2009
Publication title -
journal of engineering for gas turbines and power
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.567
H-Index - 84
eISSN - 1528-8919
pISSN - 0742-4795
DOI - 10.1115/1.3078189
Subject(s) - cetane number , combustion , homogeneous charge compression ignition , fuel mass fraction , diesel fuel , ignition system , nuclear engineering , hydrogen fuel enhancement , exhaust gas recirculation , environmental science , materials science , flammability limit , engine knocking , octane rating , process engineering , waste management , automotive engineering , chemistry , thermodynamics , vapor lock , engineering , combustion chamber , biodiesel , organic chemistry , physics , catalysis
One potential method for controlling the combustion phasing of a homogeneous charge compression ignition (HCCI) engine is to vary the fuel chemistry using two fuels with different auto-ignition characteristics. Although a dual-fuel engine concept is technically feasible with current engine management and fuel delivery system technologies, this is not generally seen as a practical solution due to the necessity of supplying and storing two fuels. Onboard partial reforming of a hydrocarbon fuel is seen to be a more attractive way of realizing a dual-fuel concept, while relying on only one fuel supply infrastructure. Reformer gas (RG) is a mixture of light gases dominated by hydrogen and carbon monoxide that can be produced from any hydrocarbon fuel using an onboard fuel processor. RG has a high resistance to auto-ignition and wide flammability limits. The ratio of H\u2082 to CO produced depends on the reforming method and conditions, as well as the hydrocarbon fuel. In this study, a cooperative fuel research engine was operated in HCCI mode at elevated intake air temperatures and pressures. n-heptane was used as the hydrocarbon blending component because of its high cetane number and well-known fuel chemistry. RG was used as the low cetane blending component to retard the combustion phasing. Other influential parameters, such as air/fuel ratio, EGR, and intake temperature, were maintained constant. The experimental results show that increasing the RG fraction retards the combustion phasing to a more optimized value causing indicated power and fuel conversion efficiency to increase. RG reduced the first stage of heat release, extended the negative temperature coefficient delay period, and retarded the main stage of combustion. Two extreme cases of RG composition with H\u2082/CO ratios of 3/1 and 1/1 were investigated. The results show that both RG compositions retard the combustion phasing, but that the higher hydrogen fraction RG is more effective. A singlezone model with detailed chemical kinetics was used to interpret the experimental results. The effect of RG on combustion phasing retardation was confirmed. It was found that the low temperature heat release was inhibited by a reduction in intermediate radical mole fractions during low temperature reactions and during the early stages of the negative temperature coefficient delay period.Peer reviewed: YesNRC publication: Ye

The content you want is available to Zendy users.

Already have an account? Click here to sign in.
Having issues? You can contact us here
Accelerating Research

Address

John Eccles House
Robert Robinson Avenue,
Oxford Science Park, Oxford
OX4 4GP, United Kingdom