Open AccessA study on preparation and characterization of carbon doped TiO2 nanotubes
Author(s) -
Srimala Sreekantan,
Roshasnorlyza Hazan,
Zainovia Lockman,
Ishak Mat
Publication year - 2014
Publication title -
malaysian journal of fundamental and applied sciences
Language(s) - English
Resource type - Journals
ISSN - 2289-599X
DOI - 10.11113/mjfas.v6n1.167
Subject(s) - materials science , methyl orange , ammonium fluoride , anatase , carbon nanotube , rutile , titanium , chemical engineering , scanning electron microscope , dopant , doping , inorganic chemistry , photocatalysis , nanotechnology , chemistry , composite material , metallurgy , catalysis , organic chemistry , engineering , optoelectronics
The present study is directed to clarify the influence of carbon doping on the degradation of methyl orange. TiO2 nanotubes were prepared by anodizing titanium foils in a two electrode configuration bath with titanium foil as the anode and platinum as the counter electrode. The electrochemical bathconsists of 1 M Na2SO4 with 0.7 g ammonium fluoride, NH4F. The nanotubes obtained were further doped with carbon via in-situ and ex-situ method. Incorporation of carbon on TiO2 via in-situ method is accomplished during the anodization process by introducing oxalic acid into electrolyte while theex-situ doping involves carbon incorporation into pre-fabricated TiO2 nanotube via flame annealing using carbon blackN330. Characterization such as Scanning Electron Microscope (SEM), Energy Dispersive X-ray Analysis (EDX), and X-Ray Diffraction (XRD) are used to determine the surfacemorphology, composition of dopants, and phases exists. Well ordered nanotube with good adherence and smooth surface was obtained for both methods. When the oxide was annealed, X-ray diffraction analysis revealed the presence of anatase and rutile phase. The photocatalytic properties of thepure TiO2 and carbon doped TiO2 were tested for methyl orange degradation and the result indicated that the in-situ doped TiO2 has much better degradation than the ex-situ and pure TiO2. The percentage of methyl orange degradation for in-situ was 20% and 41% higher than ex-situ doped TiO2 and pure TiO2, respectively.