Premium
An In Vitro Comparison of Fracture Load of Zirconia Custom Abutments with Internal Connection and Different Angulations and Thicknesses: Part II
Author(s) -
Zandparsa Roya,
Albosefi Abdalah
Publication year - 2016
Publication title -
journal of prosthodontics
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.902
H-Index - 60
eISSN - 1532-849X
pISSN - 1059-941X
DOI - 10.1111/jopr.12292
Subject(s) - connection (principal bundle) , materials science , cubic zirconia , fracture (geology) , composite material , orthodontics , structural engineering , ceramic , engineering , medicine
Purpose The purpose of part II of this in vitro study was to compare the fracture load of two‐piece zirconia custom abutments with different thicknesses and angulations. Materials and Methods Forty zirconia custom abutments were divided into four groups as follows: group A1: 0.7 mm thickness and 0° angulations; group A2: 0.7 mm thickness and 15° angulations; group B1: 1 mm thickness and 0° angulations; group B2: 1 mm thickness and 15° angulations. As in part I, in all groups, implant replicas were mounted in self‐cure acrylic jigs to support the abutments. The zirconia custom abutments were engaged in the implant replicas using a manual torque wrench. All jigs were secured and mounted in a metallic vice and subjected to shear stress till failure using a universal testing machine with a 0.5 mm/min crosshead speed with the force transferred to the lingual surface of the zirconia custom abutments 2 mm below the incisal edge. The test specimens used in this study did not include a crown. The universal testing machine was controlled via a computer software system, which also completed the stress‐strain diagram and recorded the breaking fracture load. The fracture loads were recorded for comparison among the groups and subjected to statistical analysis (two‐way ANOVA and Kolmogorov‐Smirnov). Results The mean fracture load of zirconia custom abutments across the groups (A1 to B2) ranged from 432 ± 97 N to 746 ± 275 N. The angulated zirconia custom abutment exhibited the highest fracture load, which was statistically significant ( p = 0.045). The thickness of the zirconia custom abutment also had a positive influence on the strength of the specimens ( p = 0.005). Conclusions In this study, the 15° angulated zirconia custom abutments showed the highest fracture load of those investigated. The 1 mm thick zirconia custom abutments also exhibited significantly higher fracture load compared to 0.7 mm abutments. Clinical Implications The results of this in vitro study will help dental practitioners with their decision‐making process in selecting the type of custom abutment to be used clinically.