Premium
Tubular solid oxide fuel cells fabricated by a novel freeze casting method
Author(s) -
Panthi Dhruba,
Hedayat Nader,
Woodson Theo,
Emley Benjamin J.,
Du Yanhai
Publication year - 2020
Publication title -
journal of the american ceramic society
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.9
H-Index - 196
eISSN - 1551-2916
pISSN - 0002-7820
DOI - 10.1111/jace.16781
Subject(s) - materials science , anode , tape casting , porosity , composite material , solid oxide fuel cell , yttria stabilized zirconia , microstructure , ceramic , sintering , cubic zirconia , casting , metallurgy , electrode , chemistry
Freeze casting is an established method for fabricating porous ceramic structures with controlled porosity and pore geometries. Herein, we developed a novel freeze casting and freeze drying process to fabricate tubular anode supports for solid oxide fuel cells (SOFCs). Freeze casting was performed by injecting aqueous anode slurry to a dual‐purpose freeze casting and freeze drying mold wrapped with peripheral coils for flowing a coolant. With the use of an ice barrier layer, proper control of the experimental setup, and adjustments in the drying temperature profile, complete drying of the individual anode tubes was achieved in 4 hours. The freeze‐cast anode tubes contained radially aligned columnar pore channels, thus significantly enhancing the gaseous diffusion. SOFC single cells with conventional Ni/yttria‐stabilized zirconia/strontium‐doped lanthanum manganite materials were prepared by dip coating the thin functional layers onto the anode support. Single cell tests showed that the concentration polarization was low owing to the highly porous anode support with directional pores. With H 2 /N 2 (1:1) fuel, maximum power densities of 0.47, 0.36, and 0.27 W/cm 2 were recorded at 800°C, 750°C, and 700°C, respectively. Our results demonstrate the feasibility of using freeze casting to obtain tubular SOFCs with desired microstructures and fast turn‐around times.