Premium
Fracture toughness of random fibrous materials with ultrahigh porosity at elevated temperatures
Author(s) -
Li Datao,
Yu Wenshan,
Xia Wei,
Fang Qinzhi,
Shen Shengping
Publication year - 2018
Publication title -
journal of the american ceramic society
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.9
H-Index - 196
eISSN - 1551-2916
pISSN - 0002-7820
DOI - 10.1111/jace.15263
Subject(s) - materials science , fracture toughness , composite material , finite element method , fracture (geology) , microstructure , fracture mechanics , toughness , structural engineering , engineering
The fracture toughness of three‐dimensional random fibrous (3D RF ) material was investigated from room temperature to 1273 K by virtue of experimental method, theoretical model and Finite Element Method ( FEM ) in the through‐the‐thickness ( TTT ) and in‐plane ( IP ) directions. The experiments showed that the fracture toughness in the TTT and IP directions increases (from 0.0617 to 0.0924 Mpa·m 1/2 and from 0.2958 to 0.3982 Mpa·m 1/2 for the TTT and IP directions, respectively) as the temperature until reaching a transition temperature (1123 K and 1223 K for the TTT and IP directions, respectively), then the fracture toughness decreases from 0.0924 to 0.0393 Mpa·m 1/2 and from 0.3982 to 0.3106 Mpa·m 1/2 for the TTT and IP directions, respectively. The fracture behavior was related to the bulk microstructures, the mechanical properties of fibers and the blunting of crack tip. The crack tip blunting affected the fracture toughness at elevated temperatures which was verified using the theoretical model. A FEM model with a single edge crack where special attention was drawn to the influence of the morphological characteristic was developed to simulate the fracture behavior of 3D RF material. Numerical results from the FEM modeling along with a theoretical model with crack tip blunting mechanism incorporated agreed well with the experimental results.