z-logo
Premium
Enhanced O 2 Flux of CaTi 0.85 Fe 0.15 O 3−δ Based Membranes by Mn Doping
Author(s) -
Polfus Jonathan M.,
Xing Wen,
Riktor Marit,
Sunding Martin F.,
Dahl Paul Inge,
Hanetho Sidsel M.,
Mokkelbost Tommy,
Larring Yngve,
Fontaine MarieLaure,
Bredesen Rune
Publication year - 2016
Publication title -
journal of the american ceramic society
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.9
H-Index - 196
eISSN - 1551-2916
pISSN - 0002-7820
DOI - 10.1111/jace.14022
Subject(s) - analytical chemistry (journal) , x ray photoelectron spectroscopy , permeation , dopant , materials science , activation energy , sintering , doping , chemistry , membrane , nuclear magnetic resonance , physics , biochemistry , optoelectronics , chromatography , composite material
Dense symmetric membranes of CaTi 0.85− x Fe 0.15 Mn x O 3−δ ( x = 0.1, 0.15, 0.25, 0.4) are investigated in order to determine the optimal Mn dopant content with respect to highest O 2 flux. O 2 permeation measurements are performed as function of temperature between 700°C–1000°C and as function of the feed side p O 2ranging between 0.01 and 1 bar. X‐ray photoelectron spectroscopy is utilized to elucidate the charge state of Mn, and synchrotron radiation X‐ray powder diffraction (SR‐XPD) is employed to investigate the structure symmetry and cell volume of the perovskite phase at temperatures up to 800°C. The highest O 2 permeability is found for x = 0.25 over the whole temperature and p O 2ranges, followed by x = 0.4 above 850°C. The O 2 permeability for x = 0.25 reaches 0.01 mL( STP ) min −1 cm −1 at 925°C with 0.21 bar feed side p O 2and Ar sweep gas. X‐ray photoelectron spectroscopy indicates that the charge state of Mn changes from approx. +3 to +4 when x > 0.1, which implies that Mn mainly improves electronic conductivity for x > 0.1. The cell volume is found to decrease linearly with Mn content, which coincides with an increase in the activation energy of O 2 permeability. These results are consistent with the interpretation of the temperature and p O 2dependency of O 2 permeation. The sintering behavior and thermal expansion properties are investigated by dilatometry, which show improved sinterability with increasing Mn content and that the thermal expansion coefficient decreases from 12.4 to 11.9 × 10 −6 K −1 for x = 0 and x = 0.25, respectively.

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here