z-logo
Premium
Zr 4+ /Ti 4+ Codiffusion Characteristics in Lithium Niobate
Author(s) -
Zhang DeLong,
Qiu CongXian,
Du WenJie,
Wong WingHan,
Pun Edwin YueBun
Publication year - 2015
Publication title -
journal of the american ceramic society
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.9
H-Index - 196
eISSN - 1551-2916
pISSN - 0002-7820
DOI - 10.1111/jace.13320
Subject(s) - thermal diffusivity , materials science , lithium niobate , diffusion , oxide , doping , analytical chemistry (journal) , metal , lithium (medication) , refractive index , metallurgy , chemistry , thermodynamics , medicine , physics , optoelectronics , chromatography , endocrinology
Zr 4+ /Ti 4+ ‐codoped LiNbO 3 plates were prepared by local codiffusion of stacked ZrO 2 and Ti metal films coated onto Z‐cut congruent LiNbO 3 substrates in wet O 2 at 1060°C. The metal and oxide films have different thicknesses and coating sequences. After diffusion, the Zr 4+ doping effect on the refractive index of LiNbO 3 and the Li 2 O out‐diffusion issue were studied by the prism coupling technique. The codiffusion characteristics of Zr 4+ and Ti 4+ were studied by secondary ion mass spectrometry. The results show that the Zr 4+ doping has little contribution to the refractive index of the crystal. Li 2 O out‐diffusion is not measurable. In the Zr 4+ ‐only diffusion case, the diffusivity of Zr 4+ is four times smaller than that of Ti 4+ . In the Zr 4+ /Ti 4+ codiffusion case, the Ti 4+ codiffusion assists the Zr 4+ diffusion. The Zr 4+ diffusivity increases linearly by two more times with the increase in initial Ti film thickness from 0 to 200 nm. On the other hand, the Zr 4+ affects the Ti 4+ diffusion little. Neither the ZrO 2 film thickness nor the coating sequence of Ti metal and ZrO 2 oxide films influences the diffusivity of the two ions. All the codiffusion characteristics are explained. A Zr 4+ /Ti 4+ codiffusion model is suggested that consists of two independent diffusion equations with a Zr 4+ diffusivity dependent of Ti 4+ concentration and a constant Ti 4+ diffusivity. In addition, the existence of a waveguide in the Zr 4+ /Ti 4+ ‐codoped layer is verified experimentally, and the optical‐damage‐resistant feature of the waveguide is verified by two‐beam hologram recording experimental results.

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here