Premium
A SIPHON GAGE FOR MONITORING SURFACE‐WATER LEVELS 1
Author(s) -
McCobb Timothy D.,
LeBlanc Denis R.,
Socolow Roy S.
Publication year - 1999
Publication title -
jawra journal of the american water resources association
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.957
H-Index - 105
eISSN - 1752-1688
pISSN - 1093-474X
DOI - 10.1111/j.1752-1688.1999.tb04201.x
Subject(s) - siphon (mollusc) , water level , environmental science , marine engineering , tube (container) , surface water , hydrology (agriculture) , geotechnical engineering , engineering , environmental engineering , mechanical engineering , ecology , cartography , biology , geography
A device that uses a siphon tube to establish a hydraulic connection between the bottom of an onshore standpipe and a point at the bottom of a water body was designed and tested for monitoring surface‐water levels. Water is added to the standpipe to a level sufficient to drive a complete slug of water through the siphoning tube and to flush all air out of the system. The water levels in the standpipe and the water body equilibrate and provide a measurable static water surface in the standpipe. The siphon gage was designed to allow quick and accurate year‐round measurements with minimal maintenance. Currently available devices for monitoring surface‐water levels commonly involve time‐consuming and costly installation and surveying, and the movement of reference points and the presence of ice cover in cold regions cause discontinuity and inaccuracy in the data collected. Installation and field testing of a siphon gage using 0.75‐in‐diameter polyethylene tubing at Ashumet Pond in Falmouth, Massachusetts, demonstrated that the siphon gage can provide long‐term data with a field effort and accuracy equivalent to measurement of ground‐water levels at an observation well.