Premium
OFFSITE MEASUREMENT OF THE VISUAL CLARITY OF WATERS 1
Author(s) -
DaviesColley Robert J.,
Smith David G.
Publication year - 1992
Publication title -
jawra journal of the american water resources association
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.957
H-Index - 105
eISSN - 1752-1688
pISSN - 1093-474X
DOI - 10.1111/j.1752-1688.1992.tb03194.x
Subject(s) - clarity , attenuation , visibility , environmental science , optics , hydrology (agriculture) , mineralogy , geology , chemistry , geotechnical engineering , physics , biochemistry
The black disk method for measuring visual water clarity in situ is becoming established as a simple but robust method for optically characterizing natural waters. However, in spite of its virtues, the method is limited by a practical visibility minimum of around 0.1 m and the requirement for direct access to the water body at a point where there is adequate lighting for the visual observations. A method has been devised for measuring black disk clarity off‐site on samples of waters, diluted if necessary, and contained in a trough constructed of galvanized steel. In 23 streams, rivers, and lakes of diverse optical and physical character, measurements of visual clarity of water samples contained in troughs agreed closely with in situ measurements and correlated well (inversely) with the beam attenuation coefficient measured by transmissometer. Therefore, at sites where in situ measurement is difficult, visual clarity of waters can be measured offsite on a water sample. Furthermore, the visibility of samples diluted with tap water of known clarity was predictable from a simple balance on light attenuation. This means that useful visual clarity measurements on very turbid waters and effluents can be made in a trough containing volumetrically diluted samples, so extending application of the black disk method to very low visual ranges.