z-logo
Premium
Estimating Flow Using Tracers and Hydraulics in Synthetic Heterogeneous Aquifers
Author(s) -
Larocque Marie,
Cook Peter G.,
Haaken Klaus,
Simmons Craig T.
Publication year - 2009
Publication title -
groundwater
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.84
H-Index - 94
eISSN - 1745-6584
pISSN - 0017-467X
DOI - 10.1111/j.1745-6584.2009.00595.x
Subject(s) - aquifer , tracer , hydraulic conductivity , residence time (fluid dynamics) , hydraulics , groundwater , volumetric flow rate , soil science , flow (mathematics) , environmental science , aquifer properties , sampling (signal processing) , hydrology (agriculture) , mechanics , geology , geotechnical engineering , groundwater recharge , thermodynamics , engineering , physics , soil water , electrical engineering , filter (signal processing) , nuclear physics
Regional ground water flow is most usually estimated using Darcy's law, with hydraulic conductivities estimated from pumping tests, but can also be estimated using ground water residence times derived from radioactive tracers. The two methods agree reasonably well in relatively homogeneous aquifers but it is not clear which is likely to produce more reliable estimates of ground water flow rates in heterogeneous systems. The aim of this paper is to compare bias and uncertainty of tracer and hydraulic approaches to assess ground water flow in heterogeneous aquifers. Synthetic two‐dimensional aquifers with different levels of heterogeneity (correlation lengths, variances) are used to simulate ground water flow, pumping tests, and transport of radioactive tracers. Results show that bias and uncertainty of flow rates increase with the variance of the hydraulic conductivity for both methods. The bias resulting from the nonlinearity of the concentration–time relationship can be reduced by choosing a tracer with a decay rate similar to the mean ground water residence time. The bias on flow rates estimated from pumping tests is reduced when performing long duration tests. The uncertainty on ground water flow is minimized when the sampling volume is large compared to the correlation length. For tracers, the uncertainty is related to the ratio of correlation length to the distance between sampling wells. For pumping tests, it is related to the ratio of correlation length to the pumping test's radius of influence. In regional systems, it may be easier to minimize this ratio for tracers than for pumping tests.

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here