Premium
Modeling Preferential Flow in Reactive Barriers: Implications for Performance and Design
Author(s) -
Benner S.G.,
Blowes D.W.,
Molson J.W.H.
Publication year - 2001
Publication title -
groundwater
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.84
H-Index - 94
eISSN - 1745-6584
pISSN - 0017-467X
DOI - 10.1111/j.1745-6584.2001.tb02321.x
Subject(s) - aquifer , flow (mathematics) , homogeneous , hydraulic conductivity , residence time (fluid dynamics) , flux (metallurgy) , flow conditions , geology , residence time distribution , residence , volumetric flow rate , mechanics , materials science , groundwater , geotechnical engineering , soil science , thermodynamics , physics , demography , sociology , soil water , metallurgy
Reactive barriers are passive and in situ ground water treatment systems. Heterogeneities in hydraulic conductivity (K) within the aquifer‐reactive barrier system will result in higher flux rates, and reduced residence times, through portions of the barrier. These spatial variations in residence time will affect the treatment capacity of the barrier. A numerical flow model was used to evaluate the effects of spatial variations in K on preferential flow through barriers. The simulations indicate that the impact of heterogeneities in K will be a function of their location and distribution; the more localized the high K zone, the greater the preferential flow. The geometry of the reactive barrier will also strongly influence flow distribution. Aquifer heterogeneities will produce greater preferential flow in thinner barriers compared to thicker barriers. If the barrier K is heterogeneous, greater preferential flow will occur in thicker barriers. The K of the barrier will affect the flow distribution; decreasing the K of the barrier can result in more even distribution of flow. Results indicate that less variable flow will be attained utilizing thicker, homogeneous barriers. The addition of homogeneous zones to thinner barriers will be effective at redistributing flow only if installed immediately adjacent to both the up‐ and downgradient faces of the barrier.