Premium
Thermal Impact of Residential Ground‐Water Heat Pumps
Author(s) -
Warner Don L.,
Algan Ugur
Publication year - 1984
Publication title -
groundwater
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.84
H-Index - 94
eISSN - 1745-6584
pISSN - 0017-467X
DOI - 10.1111/j.1745-6584.1984.tb01469.x
Subject(s) - heat pump , aquifer , environmental science , air source heat pumps , inlet , heat transfer , thermal energy storage , thermal , groundwater , air conditioning , hydrology (agriculture) , heat exchanger , meteorology , mechanics , geotechnical engineering , geology , thermodynamics , engineering , mechanical engineering , physics
ABSTRACT A computer simulation study was conducted to quantify the potential thermal impact of residential water‐source heat pump usage on ground‐water aquifers. In a first phase of the study, weather data for nine locations throughout the country were used to estimate the energy requirements for heating and air conditioning a typical residence. These energy requirements were then translated into the volumetric water demands for a selected heat pump at each location. A representative model aquifer was then defined and its characteristics used, along with the heat pump water requirements and design ΔT's (difference between inlet and outlet water temperature) to identify the important parameters that contribute to heat transfer and to model the movement of the thermal front resulting from injection of heat pump discharge water at the nine locations. The major factor that determines the heat pump thermal impact was found to be the net amount of heat injected into, or removed from an aquifer. Other significant factors included well design, heat pump design ΔT, and physical properties of the aquifer such as thickness, porosity and dispersivity. The study showed that, in climates where winter heating demand is very nearly equal to summer cooling demands, the injection of heat pump discharge water did not cause any significant modification of the ambient model aquifer temperature. However, in hot or cold climates where air conditioning or heating demand dominates, measurable thermal changes occurred in the model aquifer. In most cases, the maximum temperature