Premium
Fatigue resistance and failure mode of CAD/CAM composite resin implant abutments restored with type III composite resin and porcelain veneers
Author(s) -
Magne Pascal,
Oderich Elisa,
Boff Luís Leonildo,
Cardoso Antônio Carlos,
Belser Urs Christoph
Publication year - 2011
Publication title -
clinical oral implants research
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 2.407
H-Index - 161
eISSN - 1600-0501
pISSN - 0905-7161
DOI - 10.1111/j.1600-0501.2010.02103.x
Subject(s) - composite number , materials science , dentistry , implant , orthodontics , composite material , medicine , surgery
Objectives: This study assessed the fatigue resistance and failure mode of type III porcelain and composite resin veneers bonded to custom composite resin implant abutments. Material and methods: Using the CEREC 3 machine, 28 composite resin implant abutments (Paradigm MZ100) were fabricated along with non‐retentive type III veneers, milled either in ceramic Paradigm C ( n =14) or in composite resin Paradigm MZ100 ( n =14). The intaglio surfaces of the veneers were hydrofluoric acid etched and silanated (Paradigm C) or airborne‐particle abraded and silanated (MZ100). The fitting surface of the abutments was airborne‐particle abraded, cleaned, silanated and inserted into a bone level implant (10 mm, BLI RC). All veneers were luted with adhesive resin (Optibond FL) and a preheated light curing composite resin (Filtek Z100). Cyclic isometric chewing (5 Hz, 30° angle) was simulated, starting with a load of 40 N, followed by stages of 80, 120, 160, 200, 240 and 280 N (20,000 cycles each). Samples were loaded until fracture or to a maximum of 140,000 cycles. Groups were compared using the life table survival analysis (Log rank test at P =0.05). Previously published data using same‐design zirconia abutments were included for comparison. Results: Paradigm C and MZ100 specimens fractured at an average load of 243 and 206 N (survival rate of 21% and 0%), respectively, with a significant difference in survival probability ( P =0.02). Fractured specimens presented mixed failure modes and solely adhesive failures were not observed. The survival of composite resin abutments was similar to that of identical zirconia abutments from a previous study ( P =0.76). Conclusions: Non‐retentive porcelain veneers bonded to custom composite resin implant abutments presented a higher survival rate when compared with composite resin veneers. Survival of composite resin abutment did not differ from zirconia ones. To cite this article:
Magne P, Oderich E, Boff LL, Cardoso AC, Belser UC. Fatigue resistance and failure mode of CAD/CAM composite resin implant abutments restored with type III composite resin and porcelain veneers.
Clin. Oral Impl. Res . 22 , 2011; 1275–1281.
doi: 10.1111/j.1600‐0501.2010.02103.x