Premium
Rare‐Earth Disilicates As Oxidation‐Resistant Fiber Coatings for Silicon Carbide Ceramic–Matrix Composites
Author(s) -
Boakye Emmanuel E.,
Mogilevsky Pavel,
Hay Randall S.,
Cinibulk Michael K.
Publication year - 2011
Publication title -
journal of the american ceramic society
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.9
H-Index - 196
eISSN - 1551-2916
pISSN - 0002-7820
DOI - 10.1111/j.1551-2916.2010.04306.x
Subject(s) - materials science , composite material , ceramic , argon , yttrium , ceramic matrix composite , silicon carbide , hydroxide , scanning electron microscope , oxide , chemical engineering , metallurgy , physics , atomic physics , engineering
Current SiC‐based ceramic–matrix composites (SiC–SiC CMCs) rely on carbon or boron nitride fiber–matrix interphases for toughness and flaw tolerance. However, oxidation of these interphases can be performance limiting in many CMC applications. The γ‐polymorph of the rare‐earth disilicates (RE 2 Si 2 O 7 ) is a potential oxidation‐resistant alternative to carbon or BN. The formation of γ‐Y 2 Si 2 O 7 and γ‐Ho 2 Si 2 O 7 at different temperatures and processing environments was investigated. Silica–yttrium hydroxide and silica–holmium hydroxide dispersions were made and heat treated at 1200°–1400°C for 8 h in air and argon. LiNO 3 was added to the dispersions to enhance the formation of γ‐Y 2 Si 2 O 7 and γ‐Ho 2 Si 2 O 7 . The effects of excess silica and LiNO 3 dopant on the formation of γ‐Y 2 Si 2 O 7 were investigated. Coatings of Y 2 Si 2 O 7 and Ho 2 Si 2 O 7 were made on α‐SiC plate and SCS–0 SiC fiber using these dispersions. These were heat treated in argon and argon—500 ppm oxygen mixtures at 1400°C/8 h. For coatings heat treated in argon—500 ppm oxygen mixtures, X‐ray diffraction showed the formation of single phase γ‐Ho 2 Si 2 O 7 and a mixture of γ and β‐Y 2 Si 2 O 7 at 1400°C. Scanning electron microscopic image analysis gave an estimate of 18 vol% of excess silica for γ‐Y 2 Si 2 O 7 formed with high Si:Y ratio and ∼5 vol% excess silica for material formed with lower Si:Y ratio. Transmission electron microscopy of samples directly beneath indentations showed both extensive dislocation slip and fracture.