Premium
Influence of B site Substituents on Lanthanum Calcium Chromite Nanocrystalline Materials for a Solid‐Oxide Fuel Cell
Author(s) -
Ghosh Saswati,
Sharma Abhijit Das,
Basu Rajendra Nath,
Maiti Himadri Sekhar
Publication year - 2007
Publication title -
journal of the american ceramic society
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.9
H-Index - 196
eISSN - 1551-2916
pISSN - 0002-7820
DOI - 10.1111/j.1551-2916.2007.01987.x
Subject(s) - nanocrystalline material , materials science , microstructure , crystallite , solid oxide fuel cell , sintering , oxide , chromium , lanthanum , grain size , chemical engineering , atmospheric temperature range , metallurgy , mineralogy , analytical chemistry (journal) , inorganic chemistry , nanotechnology , chemistry , physics , engineering , electrode , meteorology , anode , chromatography
Highly reactive and nanocrystalline powders of LaCrO 3 based compositions, having the general formula La 0.9 Ca 0.1 Cr 1− x M x O 3−δ (0≤ x ≤0.1, and M=Al, Co, or Mg), suitable for solid‐oxide fuel cell (SOFC) applications, have been synthesized using an auto‐combustion technique with ammonium dichromate as the chromium source. Owing to very fine crystallite size (ranging from 10 to 50 nm) and the high reactivity of the powders (surface area as high as 25 m 2 / g ), the sintering temperature reduces drastically and a highly dense, uniform, and fine‐grained microstructure is obtained. A dramatic improvement in densification (nearly theoretical density) is observed for aluminum substitution, when sintered at as low a temperature as 1300°C. The microstructure shows a uniform distribution of grains having an average grain size of ∼0.5 μm. Depending on the substituent, the electrical conductivities of the sintered samples in air, at 1000°C, were found to be in the range of 10–45 S/cm, and are more than that of the values required for SOFC application. The thermal expansion coefficients, as obtained, are also comparable with the other SOFC cell components.