Premium
Sintering Behavior of Gehlenite. Part I: Self‐Forming, Macro‐/Mesoporous Gehlenite—Pore‐Forming Mechanism, Microstructure, Mechanical, and Physical Properties
Author(s) -
Jia Dechang,
Kim DongKyu,
Kriven Waltraud M.
Publication year - 2007
Publication title -
journal of the american ceramic society
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.9
H-Index - 196
eISSN - 1551-2916
pISSN - 0002-7820
DOI - 10.1111/j.1551-2916.2007.01704.x
Subject(s) - gehlenite , materials science , sintering , ceramic , microstructure , porosity , composite material , mesoporous material , chemical engineering , mineralogy , phase (matter) , chemistry , organic chemistry , engineering , catalysis
A novel kind of pore self‐forming macro‐/mesoporous gehlenite (2CaO·Al 2 O 3 ·SiO 2 ) ceramic (abbreviated C 2 AS) having a highest porosity of 80% corresponding to a volume expansion of 134% during sintering has been developed. The pore self‐forming ability, microstructure, mechanical, and thermal physical properties of the porous ceramic are related to the sintering temperature. The gehlenite ceramic shows a very good pore self‐forming ability over a very wide range of temperature from 900° to 1450°C. No vesicant is required and no hydrothermal treatment is needed, as is generally the case for other kinds of porous ceramics or glasses. The pore self‐forming ability of the C 2 AS porous ceramic can be attributed to the escape of the adsorbed water vapor during the sintering process, due to automatic hydration of the fine, amorphous, flakey‐shaped starting C 2 AS powder particles synthesized by the organic steric entrapment (PVA) method, as well as to their fine, porous microstructure. The pores of the ceramics can be either open or closed, and the average pore size ranges from 0.6 to 1.1 μm, corresponding to a porosity of 75%–80%, respectively. The porous ceramic can preserve nanometer‐sized (26–50 nm) crystallites up to 1000°C. Sintered or thermally treated under different conditions, the porous ceramics exhibit relatively high flexural strengths ranging from 9.1 to 15.4 MPa, with a standard deviation of 0.3 and 4.2 MPa, respectively. Thermal properties of the porous ceramic up to 1000°C, including thermal expansion coefficient, thermal diffusivity, specific heat, and thermal conductivity, were investigated, and the stability of the porous ceramic in boiling water was also studied.