Premium
Fracture analysis for ceramic ball in backflow valve
Author(s) -
TAKAHASHI M.,
OKABE N.,
ABE Y.,
FUJIKI K.,
KANBAYASHI R.
Publication year - 2012
Publication title -
fatigue and fracture of engineering materials and structures
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.887
H-Index - 84
eISSN - 1460-2695
pISSN - 8756-758X
DOI - 10.1111/j.1460-2695.2011.01619.x
Subject(s) - materials science , stress intensity factor , ceramic , backflow , contact mechanics , composite material , stress concentration , stress (linguistics) , fracture mechanics , ball (mathematics) , fracture (geology) , mechanics , forensic engineering , structural engineering , finite element method , geometry , engineering , mechanical engineering , mathematics , linguistics , philosophy , physics , inlet
Ceramic balls have been used as components of devices, such as those found in high‐pressure pumps for automobiles and industrial machines. In the backflow valve, for example, a ceramic ball is in contact with a conical surface. Fractures of ceramic balls are extremely rare. It is important to investigate the cause of these rare fractures to guarantee higher reliability in the backflow valve. In this paper, the fracture mechanism and strength are discussed for an equivalent normal stress σ eq beneath the contact region and the maximum principal stress σ p near the contact boundary using stress intensity from fracture mechanics. The fracture surface of the ceramic ball was formed perpendicular to load direction. We assumed that fracture origins (defect/crack) existed on lines through three high stresses that analysed by finite element method. Actual fracture of a ceramic ball was found to be caused by the equivalent normal stress beneath contact region and not to be caused by the Hertz principal stress. Stress intensity factor (SIF) was clarified to depend on pressure, taper angle, CrN‐coating thickness and the friction factor of the inside of the valve hole. A pre‐existing defect size involved in failure was estimated by the SIF using three‐dimensional elliptic defects and equivalent normal stress. Therefore, the actual fracture of a ceramic ball, which rarely occurs, could be evaluated by considering three‐dimensional elliptic defects and the Weibull distribution of defects.