Premium
Stress intensity factors and crack opening displacements for slanted axial through‐wall cracks in pressurized pipes
Author(s) -
HUH N.S.,
SHIM D.J.,
CHOI S.,
PARK K.B.
Publication year - 2008
Publication title -
fatigue and fracture of engineering materials and structures
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.887
H-Index - 84
eISSN - 1460-2695
pISSN - 8756-758X
DOI - 10.1111/j.1460-2695.2008.01235.x
Subject(s) - stress intensity factor , materials science , crack closure , cylinder , structural engineering , radius , crack tip opening displacement , crack growth resistance curve , stress concentration , finite element method , fracture mechanics , stress (linguistics) , composite material , cracking , intensity (physics) , mechanics , geometry , engineering , mathematics , optics , physics , linguistics , philosophy , computer security , computer science
This paper proposes elastic stress intensity factors and crack opening displacements (CODs) for a slanted axial through‐wall cracked cylinder under an internal pressure based on detailed three‐dimensional (3D) elastic finite element (FE) analyses. The FE model and analysis procedure were validated against existing solutions for both elastic stress intensity factor and COD of an idealized axial through‐wall cracked cylinder. To cover a practical range, four different values of the ratio of the mean radius of cylinder to the thickness ( R m / t ) were selected. Furthermore, four different values of the normalized crack length and five different values of the ratio of the crack length at the inner surface to the crack length at the outer surface representing the slant angle were selected. Based on the elastic FE results, the stress intensity factors along the crack front and CODs through the thickness at the centre of the crack were provided. These values were also tabulated for three selected points, that is, the inner and outer surfaces and at the mid‐thickness. The present results can be used to evaluate the crack growth rate and leak rate of a slanted axial through‐wall crack due to stress corrosion cracking and fatigue. Moreover, the present results can be used to perform a detailed leak‐before‐break analysis considering more realistic crack shape development.