Premium
A continuum damage model applied to high‐temperature fatigue lifetime prediction of a martensitic tool steel
Author(s) -
VELAY V.,
BERNHART G.,
DELAGNES D.,
PENAZZI L.
Publication year - 2005
Publication title -
fatigue and fracture of engineering materials and structures
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.887
H-Index - 84
eISSN - 1460-2695
pISSN - 8756-758X
DOI - 10.1111/j.1460-2695.2005.00939.x
Subject(s) - hot work , materials science , isothermal process , forging , martensite , work (physics) , strain rate , structural engineering , atmospheric temperature range , metallurgy , composite material , tool steel , thermodynamics , mechanical engineering , microstructure , engineering , physics
High‐temperature operational conditions of hot work tool steels induce several thermomechanical loads. Depending on the processes, (i.e. forging, die casting or extrusion), stress, strain, strain rate and temperature levels applied on the material are nevertheless very different. Thus, lifetime prediction models need to be able to take into account a broad range of working conditions. In this paper, a non‐isothermal continuum damage model is identified for a widely used hot work tool steel AISI H11 (X38CrMoV5) with a nominal hardness of 47 HRc. This investigation is based on an extensive high‐temperature, low‐cycle fatigue database performed under strain rate controlled conditions with and without dwell times in the temperature range 300–600°C . As analysis of experimental results does not reveal significant time‐dependent damage mechanisms, only a fatigue damage component was activated in the model formulation. After normalization, all fatigue results are defined on a master Woehler curve defined by a nonlinear damage model, which allows the parameter identification. Last, a validation stage of the model is performed from thermomechanical fatigue tests.