Premium
FATIGUE AT NOTCHES SUBJECTED TO REVERSED TORSION AND STATIC AXIAL LOADS
Author(s) -
Brown M. W.,
Hay E.,
Miller K. J.
Publication year - 1985
Publication title -
fatigue and fracture of engineering materials and structures
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.887
H-Index - 84
eISSN - 1460-2695
pISSN - 8756-758X
DOI - 10.1111/j.1460-2695.1985.tb00425.x
Subject(s) - materials science , torsion (gastropod) , stress intensity factor , cracking , composite material , fracture mechanics , brittleness , crack closure , structural engineering , stress concentration , drop (telecommunication) , shear (geology) , shear stress , medicine , engineering , telecommunications , surgery , computer science
Reversed torsion with and without a superimposed end load has been applied to 1% Cr‐Mo‐V steel specimens containing sharp notches. Crack propagation was monitored by a sensitive d.c. potential drop system that measured crack depths between 25 μm and 0.6 mm from the root of the notch. Stress intensity factors do not satisfactorily correlate all the crack growth data but a strain intensity factor which is a function of material properties and notch plastic zone size shows a significant improvement and provides a single upper bound solution for both ambient and elevated temperatures. This solution permits designers to make safe lifetime assessments. At room temperature cracks initially propagate by mode II along the surface, and mode III radially but at low stresses crack growth is continued by mode I propagation. At higher stresses a transition to mode I cracking is avoided. Elevated temperature causes a brittle layer to form and in this case cracks initially propagate by mode I which then translates to mode III cracking at high stresses. Mode III thresholds are significantly higher than mode I thresholds but a constrained shear strain zone, as found at the root of notches subjected to torsion, permits the initiation and generation of a mode III crack. The application of an axial load enhances the mode III crack propagation rate since this increases the effective crack tip intensification factor.