Premium
ESR analysis of the Nojima fault gouge, Japan, from the DPRI 500 m borehole
Author(s) -
Matsumoto Hiroshi,
Yamanaka Chihiro,
Ikeya Motoji
Publication year - 2001
Publication title -
island arc
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.554
H-Index - 58
eISSN - 1440-1738
pISSN - 1038-4871
DOI - 10.1111/j.1440-1738.2001.00346.x
Subject(s) - fault gouge , fault plane , annealing (glass) , quartz , geology , hydrothermal circulation , borehole , mineralogy , fault (geology) , seismology , materials science , composite material , geotechnical engineering , paleontology
Electron spin resonance (ESR) analyses of quartz grains in fault gouge were performed for a core sample taken from the Nojima Fault that moved during the 1995 Kobe earthquake (Hyogo‐ken Nanbu earthquake). Distribution of radiation‐induced defects in the gouge at a depth of 389.4 m was measured by extracting quartz grains from seven discrete positions within 30 mm of the fault plane on the granite side. The decrease in E′ 1 and Al centers was observed within 2 mm of the fault plane, suggesting partial annealing due to faulting. Partial annealing even at that depth suggested that conventional ESR dating, which is based on the hypothesis of complete annealing during faulting, was not applicable. Theoretical calculations of the temperature rise and of the thermal annealing of defects have been made by assuming a simple annealing model of heat generation on the fault plane. Thermal energy was calculated to have been approximately 8 MJ/m 2 to explain the profile of the heat‐affected region. Thermal energy was much larger than the one estimated from hydrothermal solution, and corresponded to the frictional heat calculated for a normal stress of 20 MPa, a displacement of 2 m, and a frictional coefficient of 0.2.