Premium
Changes in gnathosonic and tooth contact characteristics induced by experimental occlusal interferences created using a full‐cast double crown
Author(s) -
ASAZUMA Y.,
ISOGAI Y.,
WATANABE K.,
HARA K.
Publication year - 1995
Publication title -
journal of oral rehabilitation
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.991
H-Index - 93
eISSN - 1365-2842
pISSN - 0305-182X
DOI - 10.1111/j.1365-2842.1995.tb01565.x
Subject(s) - crown (dentistry) , dentistry , orthodontics , materials science , medicine
Summary Occlusal sounds, contact timings and time moments were measured and analysed on 10 subjects onto whom an occlusal interference was created experimentally. A full‐cast double crown was unilaterally set on the upper first molar of each subject, then gradually elevated for 0.06, 0.10, 0.20 and 0.30 mm by inserting a pre‐calibrated metal folio. Occlusal sound was measured with an analyser designed for the purpose. Timings and time moments were analysed with a T‐scan system. All measurements were performed at least 10 times per subject. The results showed that prolonged occlusal sound duration, changes in acoustic signal waveform and increased shift of the centre of effort were observed concomitantly with crown elevation. Differences in these values at 0.06mm as compared with those at baseline were not statistically significant. This could be explained through a physiological compensation by the periodontal ligament. The differences with baseline were statistically significant from 0.10mm ongoing. The distribution of occlusal conacts was determined by the use of a newly developed parameter. Referred to as ‘Tap Score’, the parameter consists of converting contact timings occuring in seven ranges into least‐square‐based weighted scores. Analysis of the tap score disclosed evident imbalance between the crowned and the non‐crowned side starting from 0.10mm elevation, whereby a forward shift of the major contact point was observed on the non‐crowned side. Our study demonstrated that evident changes in gnathosonic and T‐scan parameters are likely to occur at a crown elevation within a 0.06–0.10 mm range. Not only did the results show the analytical capacity of the combined use of occlusal sound analyser and T‐scan, but also they confirmed that a method using simple chairside devices, e.g. T‐scan and Dental Sound Checker, could be helpful in bringing further understanding and information on occlusal interference.