Premium
Experimental measurements of the streaming potential and seismoelectric conversion in Berea sandstone
Author(s) -
Zhu Zhenya,
Nafi Toksöz M.
Publication year - 2013
Publication title -
geophysical prospecting
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.735
H-Index - 79
eISSN - 1365-2478
pISSN - 0016-8025
DOI - 10.1111/j.1365-2478.2012.01110.x
Subject(s) - streaming current , coupling (piping) , electrical resistivity and conductivity , geology , mineralogy , fluid dynamics , conductivity , porous medium , porosity , materials science , mechanics , chemistry , physics , geotechnical engineering , composite material , nanotechnology , quantum mechanics , electrokinetic phenomena
The streaming potential across a porous medium is induced by a fluid flow due to an electric double layer between a solid and a fluid. When an acoustic wave propagates through a porous medium, the wave pressure generates a relative movement between the solid and the fluid. The moving charge in the fluid induces an electric field and seismoelectric conversion. In order to investigate the streaming potential and the seismoelectric conversion in the same rock sample, we conduct measurements with Berea sandstone saturated by NaCl solutions with different conductivities. We measure the electric voltage (streaming potential) across a cylindrical sample in NaCl solutions with different conductivities and under different pressures to determine the DC coupling coefficients. We also measure the seismoelectric signals induced by acoustic waves with a Berea sandstone plate at different frequencies and solution conductivities. The pressures of the acoustic waves are calibrated with a standard hydrophone (Brüel & 8103) at different frequencies (15–120 kHz). We calculate the quantitative coupling coefficients of the seismoelectric conversion at DC and at high frequencies with samples saturated by solutions with different conductivities. When the Berea sandstone sample is saturated by the NaCl solution with 0.32 mS/m in conductivity, for example, the DC and seismoelectric coupling coefficients at 15 kHz are 0.024 μV/Pa and 0.019 μV/Pa, respectively. The seismoelectric coupling coefficient is an important and helpful parameter for designing a seismoelectric tool. More experimental measurements of seismoelectric coupling coefficients in the frequency range of 100 Hz to 15 kHz are needed in the future.