Premium
VLF RESISTIVITY MAPPING AND VERTICALIZATION OF THE ELECTRIC FIELD 1
Author(s) -
TABBAGH ALAIN,
BENDERITTER YVES,
ANDRIEUX PIERRE,
DECRIAUD JEAN PAUL,
GUERIN ROGER
Publication year - 1991
Publication title -
geophysical prospecting
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.735
H-Index - 79
eISSN - 1365-2478
pISSN - 0016-8025
DOI - 10.1111/j.1365-2478.1991.tb00360.x
Subject(s) - electric field , magnetotellurics , electrical resistivity and conductivity , geophysics , geology , magnetic field , electromagnetic field , geodesy , acoustics , physics , electrical engineering , engineering , quantum mechanics
A bstract For over 20 years, powerful VLF transmitters have been used as electromagnetic sources for subsurface investigations in mining exploration. Measurements initially concerned the vertical component of the magnetic field or the inclination of the field and were later extended to measurement of the horizontal electric field in the direction of the transmitter, to determine the resistivity of the terrain. Measurement of the electric field is usually performed with electric lines, grounded or not, with lengths of at least 5 m. This paper presents the concept of a VLF resistivity meter with a very short electric sensor (1 m) and the results obtained with it. This technique improves the measurement of the electric field, which is in principle a point value. It also permits a higher spatial sampling rate and, by closely linking the electric sensor with the magnetic sensor on a lightweight mount, makes it possible for the instrument to be used by a single operator. In addition, transformation of the electric field data, analogous to reduction to the pole in magnetism, is proposed to correct the horizontal deformation of the anomalies created by polarization of the primary field. Comparison with direct current electrical measurements shows highly satisfactory correlations. This transformation, validated for VLF, can be extended to any electrical or electromagnetic method using a uniform primary field, i.e. gradient array in direct current or low‐frequency magnetotellurics. We call this verticalization of the electric field. Resistivity measurements and mapping using the VLF frequency range can be applied not only to mining but also to a wide range of shallow geophysical studies (hydrology, civil engineering, etc.) and are not limited to problems concerning the location of conductive targets